Ubox3 S900 Pro does not boot
My ubox stop booting up. When power up, the little red light blink slowly but nothing happen. no logo on screen at all. I downloaded the S900pro_gms_20160810_output.img and loaded it on MicroSD card and still no luck. Any idea how to restore to factory setting?
Comments
https://tvpadtalk.ca/discussion/668/restore-factory-image-for-s800-to-20160126-for-the-experienced/p1
OR
Check it out here http://www.safeprosys.com/vip/vipubox.html#tss
I finally got the firmware to load, after those steps:
Download s900-1209-v50
Download SD Card Formatter: https://www.sdcard.org/downloads/formatter_4/
Download Phoenix Card image tool English version
I used SD Card Formatter to raw format SD card first, then ran Phoenix Card in Windows 8 compatibility mode and "burned" s900.img onto SD Card.
Insert SD card into UBox, unplug power, plug power back in, wait until Firmware flash progress bar to appear. Wait for it to finish, then reboot UBox without the SD card.
http://destyy.com/q47q1d
Without Bluetooth
http://destyy.com/q47w0R
I just did mine. it works ha ha ha. Thanks, Tvpadtalk community.
Burn to microsd with Phoenix. Connect microsd to ubox then plug power cable. Then only quick red flashing for 20mins and nothing else happens. Anything I'm doing wrong? Pls help. Thx
Edit: left it all night, nothing happens except quick red flashing led light.
Also tried all other files:
- s800-160127-s.img
- s900-1209-V50.img
- S900pro_gms_20160810_output.img
None works, not even flashing red led light. =(
https://unblocktech.tv/support/download/