Ubox3 S900 Pro does not boot

My ubox stop booting up. When power up, the little red light blink slowly but nothing happen. no logo on screen at all. I downloaded the S900pro_gms_20160810_output.img and loaded it on MicroSD card and still no luck. Any idea how to restore to factory setting?

Comments

  • 535four535four Member
    edited August 2017
    My ubox stop booting up. When power up, the little red light blink slowly but nothing happen. no logo on screen at all. I downloaded the S900pro_gms_20160810_output.img and loaded it on MicroSD card and still no luck. Any idea how to restore to factory setting?
    ALL the answer is here provided by @killer23d
    https://tvpadtalk.ca/discussion/668/restore-factory-image-for-s800-to-20160126-for-the-experienced/p1
    OR
    Check it out here http://www.safeprosys.com/vip/vipubox.html#tss
  • macau99macau99 Junior Member
    It happened to my ubox couple weeks ago. I changed the power supply adapter and it works again untll now.
  • It happened to my ubox couple weeks ago. I changed the power supply adapter and it works again untll now.
    where do you get your power supply adapter?

  • macau99macau99 Junior Member
    I use the one for MXQ box.
  • AresROCAresROC Junior Member
    My S900 stopped as well. Blank screen and just a solid red LED in front.
    I finally got the firmware to load, after those steps:

    Download s900-1209-v50
    Download SD Card Formatter: https://www.sdcard.org/downloads/formatter_4/
    Download Phoenix Card image tool English version

    I used SD Card Formatter to raw format SD card first, then ran Phoenix Card in Windows 8 compatibility mode and "burned" s900.img onto SD Card.

    Insert SD card into UBox, unplug power, plug power back in, wait until Firmware flash progress bar to appear. Wait for it to finish, then reboot UBox without the SD card.
  • Hi there, where can I find the s900-1209-v50 image file? I googled and could only find on this baiqu website, which is trying to get me to download some spyware (baidunetdisk) to download the file due to size. I have the same issue, blank screen and solid red LED and feel I need to apply your fix. Thank you!
    My S900 stopped as well. Blank screen and just a solid red LED in front.
    I finally got the firmware to load, after those steps:

    Download s900-1209-v50
    Download SD Card Formatter: https://www.sdcard.org/downloads/formatter_4/
    Download Phoenix Card image tool English version

    I used SD Card Formatter to raw format SD card first, then ran Phoenix Card in Windows 8 compatibility mode and "burned" s900.img onto SD Card.

    Insert SD card into UBox, unplug power, plug power back in, wait until Firmware flash progress bar to appear. Wait for it to finish, then reboot UBox without the SD card.
  • tomato123tomato123 Show Producer
    edited September 2017
    With Bluetooth
    http://destyy.com/q47q1d

    Without Bluetooth
    http://destyy.com/q47w0R
    Hi there, where can I find the s900-1209-v50 image file? I googled and could only find on this baiqu website, which is trying to get me to download some spyware (baidunetdisk) to download the file due to size. I have the same issue, blank screen and solid red LED and feel I need to apply your fix. Thank you!
    My S900 stopped as well. Blank screen and just a solid red LED in front.
    I finally got the firmware to load, after those steps:

    Download s900-1209-v50
    Download SD Card Formatter: https://www.sdcard.org/downloads/formatter_4/
    Download Phoenix Card image tool English version

    I used SD Card Formatter to raw format SD card first, then ran Phoenix Card in Windows 8 compatibility mode and "burned" s900.img onto SD Card.

    Insert SD card into UBox, unplug power, plug power back in, wait until Firmware flash progress bar to appear. Wait for it to finish, then reboot UBox without the SD card.
    Post edited by tomato123 on
  • MyPad123MyPad123 Junior Member
    edited September 2017
    Image and video hosting by TinyPic
    I just did mine. it works ha ha ha. Thanks, Tvpadtalk community.
    Post edited by MyPad123 on
  • edited September 2017
    With Bluetooth
    https://mega.nz/#!8W4lRSTZ!AkDCfpaE43o9F2qg8d1pEUHwmR-HYZe0ty29McrJ5-Y

    Without Bluetooth
    https://mega.nz/#!oHxQwRhI!JpipE2PNQDbD9BLelNvYmSlZySfZKf-yRMd_ZeY81V0
    Hi there, where can I find the s900-1209-v50 image file? I googled and could only find on this baiqu website, which is trying to get me to download some spyware (baidunetdisk) to download the file due to size. I have the same issue, blank screen and solid red LED and feel I need to apply your fix. Thank you!
    My S900 stopped as well. Blank screen and just a solid red LED in front.
    I finally got the firmware to load, after those steps:

    Download s900-1209-v50
    Download SD Card Formatter: https://www.sdcard.org/downloads/formatter_4/
    Download Phoenix Card image tool English version

    I used SD Card Formatter to raw format SD card first, then ran Phoenix Card in Windows 8 compatibility mode and "burned" s900.img onto SD Card.

    Insert SD card into UBox, unplug power, plug power back in, wait until Firmware flash progress bar to appear. Wait for it to finish, then reboot UBox without the SD card.
    Tried the S900ProBT-0921.img file. (Back of the ubox3 says S900-ProBT)
    Burn to microsd with Phoenix. Connect microsd to ubox then plug power cable. Then only quick red flashing for 20mins and nothing else happens. Anything I'm doing wrong? Pls help. Thx

    Edit: left it all night, nothing happens except quick red flashing led light.
    Also tried all other files:
    - s800-160127-s.img
    - s900-1209-V50.img
    - S900pro_gms_20160810_output.img
    None works, not even flashing red led light. =(
    Post edited by kukine on
  • With Bluetooth
    https://mega.nz/#!8W4lRSTZ!AkDCfpaE43o9F2qg8d1pEUHwmR-HYZe0ty29McrJ5-Y

    Without Bluetooth
    https://mega.nz/#!oHxQwRhI!JpipE2PNQDbD9BLelNvYmSlZySfZKf-yRMd_ZeY81V0
    Hi there, where can I find the s900-1209-v50 image file? I googled and could only find on this baiqu website, which is trying to get me to download some spyware (baidunetdisk) to download the file due to size. I have the same issue, blank screen and solid red LED and feel I need to apply your fix. Thank you!
    My S900 stopped as well. Blank screen and just a solid red LED in front.
    I finally got the firmware to load, after those steps:

    Download s900-1209-v50
    Download SD Card Formatter: https://www.sdcard.org/downloads/formatter_4/
    Download Phoenix Card image tool English version

    I used SD Card Formatter to raw format SD card first, then ran Phoenix Card in Windows 8 compatibility mode and "burned" s900.img onto SD Card.

    Insert SD card into UBox, unplug power, plug power back in, wait until Firmware flash progress bar to appear. Wait for it to finish, then reboot UBox without the SD card.
    Tried the S900ProBT-0921.img file. (Back of the ubox3 says S900-ProBT)
    Burn to microsd with Phoenix. Connect microsd to ubox then plug power cable. Then only quick red flashing for 20mins and nothing else happens. Anything I'm doing wrong? Pls help. Thx

    Edit: left it all night, nothing happens except quick red flashing led light.
    Also tried all other files:
    - s800-160127-s.img
    - s900-1209-V50.img
    - S900pro_gms_20160810_output.img
    None works, not even flashing red led light. =(
    I had the same problem - I have the Unblocktech UBOX 4 S900Pro BT - I had to re-install firmware as I put the HDMI to 4K by mistake and rendered my unit useless as it would not connect to any 4K monitor - I could not find the latest firmware for the x4 so I installed the S900ProBT-0921.img which is for x3 - It hung during the first 5 attempts but on the 6th attempt - was able to install the x3 firmware on the x4 - all seems to work ok - it was a bit jumpy to start with but now seems to be working well. The only anomaly I found is the LED/IR is in reverse - ie - turn of - the RED led comes off! Hope this helps anyone! I will use this way until I can find the UBOX 4 firmware ...
  • 535four535four Member
    With Bluetooth
    https://mega.nz/#!8W4lRSTZ!AkDCfpaE43o9F2qg8d1pEUHwmR-HYZe0ty29McrJ5-Y

    Without Bluetooth
    https://mega.nz/#!oHxQwRhI!JpipE2PNQDbD9BLelNvYmSlZySfZKf-yRMd_ZeY81V0
    Hi there, where can I find the s900-1209-v50 image file? I googled and could only find on this baiqu website, which is trying to get me to download some spyware (baidunetdisk) to download the file due to size. I have the same issue, blank screen and solid red LED and feel I need to apply your fix. Thank you!
    My S900 stopped as well. Blank screen and just a solid red LED in front.
    I finally got the firmware to load, after those steps:

    Download s900-1209-v50
    Download SD Card Formatter: https://www.sdcard.org/downloads/formatter_4/
    Download Phoenix Card image tool English version

    I used SD Card Formatter to raw format SD card first, then ran Phoenix Card in Windows 8 compatibility mode and "burned" s900.img onto SD Card.

    Insert SD card into UBox, unplug power, plug power back in, wait until Firmware flash progress bar to appear. Wait for it to finish, then reboot UBox without the SD card.
    Tried the S900ProBT-0921.img file. (Back of the ubox3 says S900-ProBT)
    Burn to microsd with Phoenix. Connect microsd to ubox then plug power cable. Then only quick red flashing for 20mins and nothing else happens. Anything I'm doing wrong? Pls help. Thx

    Edit: left it all night, nothing happens except quick red flashing led light.
    Also tried all other files:
    - s800-160127-s.img
    - s900-1209-V50.img
    - S900pro_gms_20160810_output.img
    None works, not even flashing red led light. =(
    I had the same problem - I have the Unblocktech UBOX 4 S900Pro BT - I had to re-install firmware as I put the HDMI to 4K by mistake and rendered my unit useless as it would not connect to any 4K monitor - I could not find the latest firmware for the x4 so I installed the S900ProBT-0921.img which is for x3 - It hung during the first 5 attempts but on the 6th attempt - was able to install the x3 firmware on the x4 - all seems to work ok - it was a bit jumpy to start with but now seems to be working well. The only anomaly I found is the LED/IR is in reverse - ie - turn of - the RED led comes off! Hope this helps anyone! I will use this way until I can find the UBOX 4 firmware ...
    Here's the official Unblocktech site for ROM download, you'll need registered to download.


    https://unblocktech.tv/support/download/

Sign In or Register to comment.